Concrete Diamond Drilling Services
Diamond Drilling
10mm-1m diameters to virtually any depth and through a variety
of substrates such as concrete, masonry and stone.
Since Diamond Drilling is rotary only, vibration and noise levels
are greatly reduced. Wet Diamond Cutting controls dust, now recognised
as one of the most hazardous substances in then construction industry.
This process can be used to cut holes from 10mm-1m diameters to
virtually any depth and through a variety of substrates such as
concrete, masonry and stone.
Case Studies / Videos
Dry Drilling
Dry drilling for applications where water is not permitted.
Quite often we are required to Dry Diamond Drill , because water
cannot be used when there are live services in the vicinity.
In these cases we control the dust created by means of a using a
dust control unit situated in between the motor and the bit, which
is then attached to a dry vacuum unit.
Case Study /Video
Stitch Drilling
The perfect solution where substrate is too deep to be sawn or
access is restricted.
By making a series of overlapping core holes, openings can be formed
in walls and floors this is described as Stitch Drilling.
With virtually no limit to the depth and size of the opening, this
method provides the ideal answer when a substrate is too deep to
be sawn or access is restricted.
|
